TTC 3" Arms (Powder Coated)
 
This lift is for the Honda Pioneer 1000 and comes with everything you need to bolt on and ride. This kit comes complete with front and rear upper and lower arched a-arms, TTC HD tie rods, custom ball joints that are 7/8" chromoly heims with custom cut pins, SATV UHMW bushings, and all necessary hardware for installation. (This kit works with Stock Axles and maintains stock width)
 
Our TTC 3" kit moves the front wheels forward 3.5" and the rear wheels back 2.5" giving you 6" of extra wheelbase over stock. This makes it possible to run at least a 32" tire with zero rub. Some wheel and tire combinations will require wheel spacers. (5+2 offset not recommended without 1" spacers) (4+3 offset is ideal)
 
GIVE US A CALL BEFORE YOU ORDER if you plan to run portals and tires larger than 35". We recommend adding front link bars to help take stress off of the lower arms and lower frame tabs, as well as a few other upgrades depending on your setup.
 
Note: You must remove your sway bar with this kit. Also, bracket lifts can not be used with any of our TTC lifts.
 
For all the details, visit our "Lifts" section under "Details."
 
For installation instructions, download the PDF in the footer at bottom of page. 
 
Ask us about our upgraded tubing options for those extreme builds. 
 
What is the 2 bolt design front upper arm upgrade? (Not available for 2022+ year models) This upgrade is for those extreme builds or those having trouble with the upper frame tabs wallering or ripping. Our 2 bolt design converts the stock front upper arms from the long 10mm bolt, to two 12mm bolts at the frame. This increases strenght and drastically decreases the possibility of ripping the upper frame tabs. Our 2 bolt design kit comes with all the parts and hardware needed for installation. (This upgrade requires welding two extra tabs to the frame on each side.)